1 / 3
Aputure CF4 Fresnel + Barn Doors Rugged Case with Custom TPU "Foam" Insert — zdjęcie 1
1 / 3

Aputure CF4 Fresnel + Barn Doors Rugged Case with Custom TPU "Foam" Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A rugged, travel-ready case with a printed insert that fits the CF4 Fresnel and its attached barn doors exactly.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Aputure CF4 Fresnel + Barn Doors Rugged Case with Custom TPU "Foam" Insert 

Needs 6x M3 35mm (latches and hinges)

A rugged, travel-ready case with a printed insert that fits the CF4 Fresnel and its attached barn doors exactly, replacing the soft carrying case it comes with. 

Why I made this

The Storm 80c is clearly built to leave the studio. It's small, weather-sealed to IP65, able to run off a USB-C power bank, and Aputure even sells a handheld bracket for it. Its CF4 Fresnel, though, a 4-inch glass lens with precision barn doors, comes with a soft carrying case. That's fine on a studio shelf, but not for a gear bag, a car trunk, or a location shoot. So I designed an insert that fits it exactly and dimensioned the “Rugged Box (Parametric)” to hold it. 

How it works 

The Fresnel sits [Mini ProLock / Bowens adapter] side down, with the barn doors attached and folded on top. The custom insert cradles the lens body, then opens into a cutout shaped for the barn doors in their folded state. Nothing rattles, nothing shifts, and you can pull it out ready to mount.

Important Note: 

This uses a significant amount of material for both the case and TPU inserts, so proper preparation and material selection is important. 

What I used here:
  • Case: 3D-Fuel PCTG Matte Black. It gives a professional finish with no visible layer lines, and it printed this tall, fairly thin-walled case with no warping at all.

  • Insert and Lid Filler: SiriyaTech TPU Air. It foams as it prints, so the insert looks and feels like a real foam case insert. Most people assume it's foam until you tell them

Tagi