1 / 2
Phanteks Pi - Raspberry Pi Zero 2W Case — zdjęcie 1
1 / 2

Phanteks Pi - Raspberry Pi Zero 2W Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for RPi Zero 2w inspired by the Phanteks XT M3

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

It's a case for the Raspberry Pi Zero 2w inspired by the Phanteks XT M3 PC case. Lowkey I got no clue why I made it except procrastination, and I like the original case.

Materials

  • PLA or other rigid filament

  • 4x M2.5x4 heat threaded inserts

  • 4x M2.5x4 screws

Guide

Printing

Everything prints in one part; orient it upright when printing, the way it would stand on a desk, and the orientation in the photo. Supports are required.

Assembly
  1. Add the heat threaded inserts into the premade cavities.

  2. Screw in the Raspberry Pi Zero 2w.