Gamegenic Token Silo Compatible Tray and Dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More ways to organize using the Gamegenic Token Silo
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I love the Gamegenic token silo but find that it doesn't work in all cases or all workflows. I wanted more choices on how I use and how I divide things up then what was offered. Since I had so many of them already, I really want the bits to be backwards compatible with the trays and the smaller bins that it already comes with. This is a work in project that I have constantly been creating based on different needs.
Printed just in PLA, I live in a hot country and prefer PETG or ABS and have found that this works just fine for both.
Everything printed in default settings on PEI sheet.
5-15% infill gyroid
If you plan to carry it around often, I would recommend more perimeters and more infill, helps a lot in this simple box
Everything is based around the smallest size they offer which is the 1x1.
half x1 is for very small bits that need their own container
half x4 is for pens and other long items that don't really fit the regular bins
LONG SILO
I find that the regular tray is great for storage but doesn't really work for boardgames, card games or war games. The boxy shape means it takes up more space than you may want and makes it awkward for the rest of the players unless you want all players to have access to all of the tokens at once. That's why I designed a longer less obtrusive design that works better on table edges and gets out of the way of the action.
Currently the lid does not have a latch so I just used sticky tack to hold it together.
Lid also does not have feet to keep it not flat on the table when put upside down, decided to just add this after and super glue it, putting it together increases the waste of support material so I advise against it but it will make a stronger joint.
For my old take on these: https://www.printables.com/model/1062298-gamgenic-token-silo-compatible-tray-tcg-size
I have found that my design is a little on the tight side. will adjust in future versions as I get around to learning blender and have the free time.