Desktop Tape Rack [no supports/no extra hardware]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack to organize tapes of all sizes.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
A desktop tape rack to organize rolls of tape.
Everything snaps together nicely, no extra hardware or glue required!
🔎 Check out more of my designs here.
Quick facts
Size: 25 x 14 x 13.5 cm (9.8 x 5.5 x 5.3 in)
Parts: Base, Back, Right Panel, Left Panel
Supports: none (all parts should be printed flat)
Material: any
Walls: 3+ for strength
Print time: about 8 hours
Filament: about 200 g
Assembly: snap fit.
Storage Capacity
Once assembled, the rack has 23 cm (9 in) of space, which can hold:
4 rolls of 2-inch tape
9 rolls of 1-inch tape
19 rolls of 1/2-inch tape
3D Printing & Assembly Instructions
Optimized for FDM 3D printing, this model requires zero supports, ensuring clean tolerances straight off the build plate.
Assembly: Snap together the ends of Back and Base to Left Panel and Right Panel.