Circuit Board Bracket openscad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This library will make parameterized brackets to hold a board in place
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Sometimes screws and standoffs just won't do the job because circuit board designers haven't provided mounting holes in the right places (or at all). Or not enough clearance around the screw holes to avoid damaging components. (Or some of us just aren't that steady with a screwdriver.
Openscad modules to make corner and side brackets with support and 1mm lips to catch the edge of a board, and screw points at a safe distance. Bracket dimensions and height adjustable. (If you're 3D-printing your entire assembly, there's also a variable you can set to false to get rid of the part for the screw.)
Print with at least a couple of perimeters and enough infill to not be fragile. Also, read the file and experiment a little, because the bracket dimensions are a little weird.