Knarr Recruit and Bracelet Tokens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Move your tokens around easier
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Knarr is a great game, but the tiny cardboard chits for Recruits and Bracelets can be a little fiddley depending on fingernail length.
These are replacement tokens with more depth to replace the cardboard ones. They have a slight relief, so they can be printed with a color change (if you don't have a fancy, multi-color printer) and produce a bit of 3D effect. (OK, 2.5D :-) )
The Recruit tokens come out really well with a white and army green.
The Bracelet tokens are tricky. They require two color swaps. When I used red as the top layer, a black, "shadow" layer would make the very slightly translucent red far too dark. When I used dark red or wood brown for the "shadow" layer, it didn't stand out enough. The best effect I could muster from the filaments available to me came from black and metallic copper.
These were printed with a .4mm nozzle and .15mm layer height. I suspect a .2mm nozzle would make these look a lot better.