Upholstery Buttons – Different Sizes and Lace Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-Printed Upholstery Buttons – Different Sizes and Lace Design
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
These free STL files allow you to 3D-print your own upholstery button tops in different sizes and colours.
The set includes button tops with diameters of 1.5, 2, 3 and 6 cm, plus a special 3 cm design with holes for a lace.
The printed tops are designed to fit the metal backs of Astor upholstery buttons with a wire loop. The back of each printed top has a recess to accommodate the raised profile of the metal back.
Available sizes for the Astor metal backs:
- 24 lines
- 28 lines
- 44 lines
The printed tops can be attached to the metal backs using contact adhesive or superglue. Make sure the surfaces are clean before bonding them.
For the lace design, thread the lace through the holes in the printed button. Trim the lace at the back, fold it over and secure it with superglue.
Please note: These STL files are for the 3D-printed button tops. The Astor metal backs and the lace are not included.
You can use these buttons for upholstery and other creative projects where a customised button is needed.
Watch video how to assemble the buttons.
www.camperend.com is part of www.stofensteen.com