Ibanez Edge III dive-only block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tremolo block for Ibanez Edge III to block reverse movement while keeping pitch dive available
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
This tremolo block was designed for Ibanez Edge III tremolo, installed on Ibanez GRG250DX. Blocks tremolo in reverse direction but allows to pitch dive.
Printed using PLA using standard 0.2mm layer preset for Bambu Lab P2S, 5 wall loops, 100% infill.
Before printing, please check your dimensions around tremolo module under back cover.
Total height of the block is 28mm, thickness of the top of the block (minimum clearance to back cover) is 4.2mm
Tested with 3 tremolo spring in parallel in Drop C, and also with 12-54 gauge in Drop C and Drop A# with 3 springs in V-shape with fine tune fully screwed in (maximum tension).
Here's a video of the design: