Inbxx - Core One - Bottom Bracket Adapter - Casters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to add casters (2" wheel dia, 2.88"x2.88" plate) to the Inbxx by Voxel.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter to add casters (2" wheel dia, 2.88"x2.88" plate) to the Inbxx by Voxel.
This is the exact casters I purchased: https://www.amazon.com/dp/B0H1QZHJW9?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
(Leveling Casters Wheels Set of 4, Heavy Duty 2200LBS Load, 2 Inch)
When using I attached the casters with M5 x 20mm (25 Pack) Metric Flat Head Hex Socket Cap Screws Bolts. (https://www.amazon.com/dp/B0CTBKFJW9?ref=ppx_yo2ov_dt_b_fed_asin_title)
Attachement is simple.
Remove the corner screws that hold on the bottom plexiglass. Insert four bolts that come with the casters into the appropriate holes in the bracket. Install the bracket onto the bottom of the Inbxx (before attaching the actual caster) with the M5x20mm screws. Attach casters to the four bolts.
The 3mf file should work, but if it is not to scale, simply reduce the scale by a factor of 10.