Low Hardware Nerf Sure.t Drum mag Extension| Nerf Half Dart/Talon mag 25round Drum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low Hardware Nerf Sure.t Drum mag Extension| Nerf 25rnd Drum mag
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Nerf Sure.t Drum mag Extension| Nerf 25rnd Drum mag
Assembly instructions:
Take the Backside of the Drum(the one with the hole) and push the knob through then push the fan inside the Drum onto the knob and glue.
Push on the front of the Drum(the one without a hole) and push it onto the Backside take the adapter and push it through
Glue on the Print in Place Hinges and glue them onto the outside of the drum so they keep the drum from falling apart if they are Bent correctly
pull the Elastic Band through one side of the Drum and the knob and the other side then knot the Elastic Band so it is slightly streched in the neutral position(Fanblade pointing upwards to the left)
Spin the Knob Back and put in the dummys
Add Magazine Body on top
Usage instructions:
If the Mag fails to load spin the Knob towards Neutral slightly until it clicks or the Dart is at the Top of the mag and try to fix it with lubricant and some pretension on the Elastic band
you might be able to use the springs and one/two dummys instead of the 6dummies to add more capacity and reduce the Mag fails havent tested though
Printing Settings:
use Hole filling threshold as 0 and Hole Compensation to 0.5 for the Print in Place Hinges