Gridfinity Bin for Wahoo ELEMNT ROAM – Quarter-Turn Mount Well, Stackable, 2 Colours
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable 3×2 Gridfinity bin, 40 mm tall: snug pocket with a well for the quarter-turn mount, cable bay, red floor.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
What it is
A stackable Gridfinity bin for the Wahoo ELEMNT ROAM. The computer lies flat in a snug pocket, with a well underneath for the quarter-turn mount on its back, and an end compartment holds the USB cable and the out-front mount.
Features
Gridfinity 3×2, 40 mm overall height with the stacking lip
Pocket 92.5 × 61.5 mm (1 mm clearance around the device), two finger notches
Ø 36 mm well, 6 mm deep, under the pocket for the quarter-turn mount, so the computer sits flat
End compartment for the USB cable and the mount
Standard stacking lip: any Gridfinity bin of the same size stacks on top
Heights follow a 20 / 40 / 60 mm series, so a full stack stays within 120 mm
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 15 % infill
No supports, no brim
The 3MF assigns the colours: slot 1 red, slot 2 white. Red is a 0.6 mm inlay on the pocket and well floors, three layers only.
Single colour: print the white STL alone.
Notes
Printed and tested on my own ROAM (photos): it drops in with about 1 mm of play and lifts out easily with the finger notches.
Designed with AI assistance (parametric Python script).
En français
Bac Gridfinity 3×2 empilable de 40 mm hors tout pour le Wahoo ELEMNT ROAM : empreinte à plat avec 1 mm de jeu et deux encoches, creux de Ø 36 sur 6 mm sous l'appareil pour la fixation quart de tour, compartiment pour le câble USB et le support. Lèvre d'empilement standard, sans support, fond des empreintes rouge (emplacement 1), bac blanc (2).