1 / 3
Gridfinity Bin for Wahoo TRACKR Heart-Rate Strap – Slim 3×1, Stackable, 2 Colours — zdjęcie 1
1 / 3

Gridfinity Bin for Wahoo TRACKR Heart-Rate Strap – Slim 3×1, Stackable, 2 Colours

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim stackable 3×1 Gridfinity bin, 60 mm tall, for the TRACKR strap rolled around its sensor. Red floor, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

What it is

A slim stackable Gridfinity bin for the Wahoo TRACKR heart-rate strap, rolled up around its sensor. One deep slot, a finger notch at each end, and it takes only one row of the grid.

Features

  • Gridfinity 3×1, 60 mm overall height with the stacking lip

  • One compartment 120 × 36 mm, 50 mm deep

  • Fits the strap rolled around the sensor, about 90 × 35 × 40 mm (roll it no wider than 35 mm)

  • Finger notches at both ends to lift the strap out

  • Standard stacking lip: any 3×1 Gridfinity bin stacks on top

  • Heights follow a 20 / 40 / 60 mm series, so a full stack stays within 120 mm

Print settings

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 15 % infill

  • No supports, no brim

  • The 3MF assigns the colours: slot 1 red, slot 2 white. Red is a 0.6 mm inlay on the floor, three layers only.

  • Single colour: print the white STL alone.

Designed with AI assistance (parametric Python script).

En français

Bac Gridfinity 3×1 empilable de 60 mm hors tout pour la ceinture cardio Wahoo TRACKR enroulée autour de son capteur (environ 90 × 35 × 40 mm, à rouler sur 35 mm de large au plus) : un compartiment de 120 × 36 mm sur 50 mm de profondeur, une encoche à chaque bout. Lèvre d'empilement standard, sans support, fond rouge (emplacement 1), bac blanc (2).

Tagi