Wiggly Ghost – Articulated Flexi Halloween Ghost, Print in Place, No Supports, Multicolor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute print-in-place flexi ghost with a swishy 4-part tail. One piece, no supports, 4 sizes, MMU face.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
What it is
A cute little ghost with raised "Boo!" arms and a long curly tail made of four parts. It prints in one piece, flat on the bed, and wiggles as soon as you pick it up. Kids love it, and it makes a perfect print-and-give treat for Halloween.
Features
Print in place: three captive pin joints, nothing to assemble.
0.4 mm joint clearance, ±18° per joint with a soft stop, so the tail swishes up to ±54°.
Diamond-shaped pins with 45° slopes: no supports anywhere, and the parts cannot pop apart.
Four sizes: S 95 mm, M 131 mm, L 171 mm, XL 213 mm (long side).
Multicolor face inlaid flush in the top layers: black eyes and mouth, purple cheeks.
Family plate included: one M and two S nested on one bed.
Looks great in glow-in-the-dark white PLA.
Print settings
PLA, 0.4 mm nozzle, 0.2 mm layers, 2 perimeters, 15 % infill.
No supports, no brim. Print flat, face up.
Keep the first layer clean: elephant's foot is the only thing that can fuse a joint (the sockets already get 0.25 mm of extra relief on the first layer).
After printing, flex each joint gently a few times to free it.
Approximate times (not sliced on every machine): S 35 min, M 1 h 15, L 2 h 15, XL 3 h 45.
Colours
The 3MF files already have the extruders set: slot 2 white (body), slot 3 black (eyes and mouth), slot 5 purple (cheeks).
Single colour: print the STL; pause at the last 3 layers to swap to black for the face.
Designed with AI assistance (parametric Python script). Not test-printed yet: if a joint is too tight or too loose on your printer, please tell me in the comments.
En français
Petit fantôme articulé imprimé d'un bloc, à plat, sans support : trois articulations captives (jeu 0,4 mm, ±18° chacune), quatre tailles (S à XL), visage incrusté en multicolore (blanc 2, noir 3, violet 5). Parfait à imprimer et à offrir aux enfants. PLA 0,2 mm, 15 % de remplissage ; faire jouer chaque articulation à la sortie du plateau.