Festool MFT metric hex wrench tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for putting your 2.0 - 10.0 mm T-handle hex wrenches into that (sans-tools) slides onto your MFT rails.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This slides securely onto the rail profile of your Festool MFT/3 table or MW-1000 portable workbench. For the MFT/3, it slides on very easily; for the MW-1000 (with the plastic caps on the rails), it's a snug fit past the caps, but slides easily on the aluminum rails themselves. No tools needed; this is supposed to be convenient!
The holes are sized and positioned for the Klein Tools metric T-handle set, but most T-handle sets should be compatible. The sizes are 10, 8, 6, 5, 4, 3, 2.5 and 2 mm.
I printed this in PETG, no supports, rotated so the holes are perpendicular to the build plate (i.e., on its end). This allows for the greatest strength, so I recommend that orientation.