Sovol Zero Idler Bracket Reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol Zero Idler Bracket Reinforcement. +3-5 HZ Shaper Frequency
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Caution: Collides with the left lower guide for the Tool head Cover and PREVENTS HOMING. Just broke mine off, it will not be missed.
Printed it solid, 3g each in asa. Maybe that's unnecessary. Pushed them quite strong against the Idler Brackets while i tightened them down. The less lazy way would probably be to install them with loose belts and low force.
Observed effects on my Printer:
Increased X Resonance amplitude but lowered Y
X Resonance Frequency +5Hz, Y Resonance Frequenzy +3Hz
Worsened Vibration Profile amplitude, maybe my custom stepper settings need adjustment now
Increased Vibration Profile Symmetry to 100%
BOM:
2x 3x35 Screw or 37mm threaded rod + nut.
2x Washers
You could countersink shorter Screws to make them fit.
Step 1: Print. Step 2: Pray. Step 3: If it breaks, refer to Step 2. I accept no responsibility for entropy, slicing errors or anything else.