Gridfinity Bin for CYCPLUS A2 Electric Bike Pump – Hose & Adapter Lane, Stackable, 2 Colours
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable 5×2 Gridfinity bin, 80 mm tall, for the CYCPLUS A2 pump, with a lane for the hose and valve adapters.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
What it is
A stackable Gridfinity bin for the CYCPLUS A2 portable electric bike pump. The pump lies flat in a pocket shaped like the pump, and a lane beside it holds the hose, the Presta and Schrader adapters and the ball needle.
Features
Gridfinity 5×2, 80 mm overall height with the stacking lip (209.5 × 83.5 mm)
Pocket 183 × 58 mm with 6 mm corners, 1.5 mm clearance all round, about 70 mm deep
Finger notches at both ends of the pump and on the lane side
Lane 204 × 20 mm for the hose, valve adapters, needle or USB-C cable
Standard stacking lip: any Gridfinity bins stack on top
Heights follow a 20 / 40 / 60 / 80 / 100 / 120 mm series: this 80 mm bin plus 40 mm bins on top stays within 120 mm
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 15 % infill
No supports, no brim. Prints as shown, feet on the bed.
The 3MF assigns the colours: slot 1 red, slot 2 white. Red is a 0.6 mm inlay on the pocket floor, three layers only.
Single colour: print the white STL alone.
Fits a 250 × 220 bed.
Notes
Pump size 180 × 55 × 53 mm, length checked on a real pump.
Update v2 (28 Oct 2026): the first version had a capsule-shaped pocket with fully rounded ends, and the pump's square-ish corners jammed before it went in. v2 has a rectangular pocket with 6 mm corners and 1.5 mm clearance. If you printed v1, please reprint.
Not affiliated with CYCPLUS.
Designed with AI assistance (parametric Python script).
En français
Bac Gridfinity 5×2 empilable de 80 mm hors tout pour la pompe électrique CYCPLUS A2 (180 × 55 × 53 mm) : empreinte rectangulaire de 183 × 58 mm (coins de 6 mm) avec 1,5 mm de jeu (v2 du 28/10 : la v1 en gélule bloquait les coins de la pompe), encoches pour les doigts aux deux bouts et côté couloir, couloir de 20 mm pour le flexible, les embouts Presta et Schrader et l'aiguille. Lèvre d'empilement standard ; série de hauteurs 20 / 40 / 60 / 80 / 100 / 120 mm, pile ≤ 120 mm. Fond rouge en incrustation de 0,6 mm (emplacement 1), bac blanc (2), sans support. Sans lien avec CYCPLUS.