Antares Creature Sculpt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a high-detail creature sculpt of a tall, 6-spiked alien fauna from the sci-fi comic series Antares by artist Leo
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a fantastic print for fans of graphic novels, sci-fi world-building, or unique creature designs. Due to the fine details on the ears and lean proportions, it requires careful orientation and targeted support placement.
Tested Print Settings
Slicer Supports: Tree supports are highly recommended.
Support Painting: Use manual support painting directly underneath the main bodies, under the chin, and heavily concentrated around the ankles to stabilize the lean legs during printing (see photo).
Wall Loops: 3 wall layers for added structural integrity on the slender limbs.
Infill: 10% - 15% Gyroid infill for maximum strength with minimal material.
Note on Scale: The larger you print this model, the better. Scaling it up ensures that the delicate ear structures print nicely. I printed mine at 180 mm height.
⚠Crucial Support Setting⚠: Set your First Layer Support Expansion to 20 mm. It guarantees excellent bed adhesion and prevents the model from wobbling or breaking loose as it reaches its full 180 mm height.
I would love to see your prints! Please post your makes, and comment below if any issues arise. Hope you enjoy! :)