Sculptural Reindeer – Christmas Decor, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elegant standing reindeer, 196 mm, smooth lines, no facets. One piece, printed upright with no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
A standing reindeer for the mantel or the sideboard. Smooth, flowing shapes instead of facets: long legs that grow into the body, a raised head with a broad muzzle, leaf-shaped ears and two wide antlers with four tines each.
196 mm tall, 112 × 52 mm oval base, one single piece
Printed upright, straight from the 3MF: no supports, no glue
Every surface stays within 45°: the belly is a soft arch between the legs, the chin a gentle slope, every antler branch rises at 36° or steeper
Thin oval base for grip on the bed and a steady stance (a version without base is included)
Legs at least 5.6 mm thick, antlers about 3.5 mm at the tips
Lovely in matte white or silk gold, and even better as a pair
Print settings
PLA, 0.4 mm nozzle, 0.2 mm layers
3 perimeters, 15 % infill, no supports, no brim
Slow the outer wall above 130 mm (or switch to 0.15 mm layers) for the cleanest antlers
About 7 h and 85 g (estimate, check in your slicer)
Without base (renne-sans-socle): add a 5 mm brim
Files
renne.3mf: ready to slice
renne.stl and renne-sans-socle.stl
renne.py, sdf.py, outils.py: the parametric Python scripts (manifold3d) that build the model and check overhangs, wall thickness, balance and single-body output
File names are in French: renne = reindeer, sans socle = without base.
Also see my modern nativity set in the same style.
Designed with AI assistance (parametric Python script).
En français
Renne sculptural debout, pour la cheminée ou le buffet. Formes lisses et fluides, sans facettes : pattes longues qui se fondent dans le corps, tête levée au museau large, oreilles en feuille et bois larges à quatre andouillers.
196 mm de haut, socle ovale 112 × 52 mm, une seule pièce
S'imprime debout, tel quel depuis le 3MF : ni support, ni colle
Toutes les surfaces restent sous 45° : ventre en voûte douce entre les pattes, menton en pente, chaque andouiller monte à 36° ou plus raide
Socle ovale fin pour l'adhérence et la stabilité (version sans socle fournie)
Pattes de 5,6 mm minimum, bois d'environ 3,5 mm aux pointes
Superbe en blanc mat ou en or soie, et encore mieux à deux
Réglages : PLA, buse 0,4, couches 0,2 mm, 3 périmètres, remplissage 15 %, sans support ni bordure. Ralentir la paroi externe au-dessus de 130 mm pour des bois nets. Environ 7 h et 85 g (estimation). Sans socle : bordure de 5 mm.