Stealthburner mount for Micro Swiss Direct Drive Extruder configured for Linear Rail System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a re-designed bracket to utilize Micro Swiss' Direct Drive extruder configured for linear rail. Additionally -…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a re-designed bracket to utilize Micro Swiss' Direct Drive extruder configured for linear rail. Additionally - I designed a cable relief bracket to help with cable management. Be careful with the mounting hardware - bolt length should be selected carefully for the locations that butt on the MGN carriage (not to protrude from the threads on the plate).
BLTouch offsets are:
x_offset: -42
y_offset: -7
Print Settings
Rafts: No
Supports: No
Resolution: 200
If you like my work - you can buy me a coffee :)
Category: 3D Printer Parts