BenchOrder - Numbered Teardown Tray | 4 & 6 Compartments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep screws in disassembly order: numbered pockets, direction arrows and a tool channel. Two one-piece tray layouts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
BenchOrder keeps small parts grouped in the order you removed them. Put the first group in pocket 1, follow the raised arrows for the following steps, then reverse the order during reassembly. A long rear channel holds small bench tools.
Two layouts are included in this single project:
- 4 numbered pockets: wider compartments for fewer steps.
- 6 numbered pockets: more separation between steps.
Both measure 160 x 110 x 18 mm. The floor and nominal walls are 2.4 mm; numbers and arrows rise 0.6 mm above the floor. Corners are rounded in plan view. Each variant is one solid piece and requires no assembly.
Print orientation and suggested starting settings
Place the broad flat underside on the bed, with open pockets facing upwards. Suggested starting point: PLA, 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, 5 bottom/top solid layers and 15% infill. Designed for printing without supports. Use your own printer and material profile and preview the raised marks before printing.
Verification status
The exported STL files have been re-imported and checked for closed geometry, consistent orientation, one solid component and the stated dimensions. Offline slicing is checked with a separate generic PLA profile, not with settings from a physical production machine. Physical printing has not yet been tested. The preview images are CAD renders of the actual exported STL files, not photographs. No printer-specific G-code is provided.
Files and customization
STL and geometry-only 3MF files are supplied for both layouts. Import STL in millimetres at 100% scale. The 3MF files explicitly use millimetres and contain no printer preset. The original parametric Python source and instructions are included. Changes to dimensions require a fresh geometry and slicing check.
Original design by MARGRAF ITALY. This is not a remix of another model. License: Creative Commons Attribution 4.0 International.
Italiano
Vassoio numerato per tenere separati i piccoli componenti durante smontaggio e rimontaggio. Seguire numeri e frecce durante lo smontaggio e procedere in ordine inverso durante il rimontaggio. Sono incluse le varianti da 4 e 6 scomparti, entrambe da 160 x 110 x 18 mm, con canale posteriore per gli utensili. File verificati digitalmente; stampa fisica non ancora provata. Le immagini sono render dei file effettivi. Progetto originale, sorgente modificabile incluso.