Harbor Freight Hercules Battery Cover and Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slide on protective battery cover and battery holder / hanger
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The battery cover name plate sets into the recess and glued in. The plate size is 14 x 55 x 4mm thick. The blue section is 3mm and the white text is 1mm. It just requires a simple filament change after the 3mm layer is printed. The only filament waste is the one time purge to change color.
Print with recess down and rails up with supports. I found standard supports worked better than tree supports. I used 0.20 layers, 3 walls, 20% infill with navy blue matte and generic white PLA from Amazon. I include a 3mm thick blank plate that is bottom chamfered for you to add your own text.
The battery holder name plate is the same except the size is 12 x 47mm.