Crater Lake Topography and Bathymetry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mountains (topography) and underwater features (bathymetry) of Crater Lake.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 809
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial
This model shows the topography and bathymetry of Crater Lake. For better looking results I recommend using PrusaSlicer's variable layer height feature. To save time print the bottom ⅓ of the model at 0.30mm layer height, and the top ⅔ at 0.10mm for better feature detail. To print the under-water portions of the model in a different color, change filament at approximately 17.50mm.
The 3MF file (Crater Lake Round Color Change.3mf) has the variable layer height and color change feature already created.
30% infill is recommended to prevent top layers from curling up and catching the PINDA probe.
The arrow on the bottom of the model points North.