Yak Attack BlackPak Pro leader spool mounts

I love these things.  They really put leader material exactly where I want it for rigging, and provide a great adjustable tension so you aren't backlashing your storage reels and making a mess of things.

• These mount Seaguar leader spools to your Yak Attack BlackPak Pro, for kayak fishing.

• If you have a different storage spool you'd like to attach, message me with the exact width of your spool, as well as the diameter of the spool hole (it must have a hole, some prints do not . . . ) and I'd be happy to upload files for you to test.

This is a very particular print:

• you must print this in something tough and flexible, like TPU.  I printed in "TPU for AMS" which is nice and hard, but still forgiving.

• If you print in common material such as PLA or PETG, your screws will most certainly break, and you will not have the "grip" needed to maintain tension on the storage spool.

• I have not tried ABS/ASA, but would love to hear about your experience if you try.  Take note of the next bullet, which is likely relevant to ABS/ASA . . .

• The tolerances between the screw and the mount are very tight.  This is very on purpose, and based in real-world experience.  I found that with tight tolerance in TPU, I could really "dial in" the resistance I wanted on the storage reel, making leader material easy to size while rocking/rolling in the water.

• Use spray silicone or similar lube on the screw, and expect it to wear in over use.  It will feel very harsh first time you tighten it up, but in my experience it wears in perfectly at these tolerances.

• I did not counter-sink the screw holes in the mount - it's fine if you use counter-sunk screws, TPU compresses . . . mostly this was just laziness.