1 / 3
FirArc - Curved-Fin Christmas Tree | 120 mm — zdjęcie 1
1 / 3

FirArc - Curved-Fin Christmas Tree | 120 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small tabletop Christmas tree with three curved fins and open spaces. One piece, no assembly.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

FirArc is a small tabletop Christmas tree shaped by three gently curved fins. Stepped outlines give it a fir silhouette, while the spaces between the fins keep the form open. A small ring connects the fins at the foot. It is one piece and needs no assembly.

Size and form

The exported model measures approximately 73.6 x 67.5 x 120 mm. The three fins are spaced 120 degrees apart, with 2.4 mm nominal thickness. The connecting ring is 18 mm outside diameter, 10 mm inside diameter and 3 mm high.

Printing

Print upright, with the feet and ring flat on the bed. Start by reviewing a 0.4 mm nozzle / 0.2 mm layer profile suited to your printer and material. Check the first layer, branch returns and tip in the sliced preview. A brim may help according to your bed adhesion. The fine opening near the tip depends on the resolution and process; it is not a guaranteed physical clearance.

Verification

The exported STL and geometry-only 3MF were independently checked for one closed connected body, dimensions, openings, fin thickness and placement. Both produced actual offline toolpaths through 600 layers to 120 mm, preserving the fins and tip with supports disabled. Physical printing, adhesion, stability, resistance and finish have not yet been tested. Images are CAD renders of the exported model.

Files

One STL, one geometry-only 3MF in millimetres, the original editable Python source, bilingual instructions and licence. Arrange or centre the STL on your bed. The 3MF has positive XY placement and contains no printer or material preset.

Original design by MARGRAF ITALY. Creative Commons Attribution 4.0 International. Indoor tabletop decoration.

Italiano

Alberello di Natale da tavolo in un solo pezzo, con tre falde curve e spazi aperti fra le falde. Ingombro circa 73,6 x 67,5 x 120 mm; spessore nominale 2,4 mm. Le falde sono collegate da un piccolo anello alla base. Stampare in verticale con basi e anello sul piatto, usando il proprio profilo e controllando anteprima, rientri e punta. Il piccolo vuoto vicino alla punta dipende dalla risoluzione di stampa. Geometria e slicing offline verificati; stampa, adesione, stabilita e finitura reali ancora da provare. Le immagini sono render CAD. Sorgente originale incluso, licenza CC BY 4.0.

Tagi