1 / 3
Sony Remote Battery Cover - RMT-AH301U (Soundbar Remote) Replacement — zdjęcie 1
1 / 3

Sony Remote Battery Cover - RMT-AH301U (Soundbar Remote) Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement battery cover for the Sony RMT-AH301U soundbar remote control (used with Sony HT-CT290/HT-CT291 and similar)

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

Replacement battery cover for the Sony RMT-AH301U soundbar remote control(used with Sony HT-CT290/HT-CT291 and similar soundbars). Reverse-engineered with calipers from an original cover; no STL for this model existed online that I could find, so here it is.

Slides on like the original: two side tabs ride in the grooves on the remote. body and a flexible snap hook clicks into the shell at the open end. Tested on an actual remote. Snug fit, positive click, and it releases the same way as the stock cover (press the hook, slide).

Notes:

Printed and fit-tested on an original RMT-AH301U remote at these exact dimensions - no scaling needed.

  • If your printer runs tight, the side tabs are the contact points: they’re 1.5 mm proud of the inner walls. A light touch with a file brings them in.

  • Model was built parametrically in Fusion, so variants (tighter/looser tabs, different wall thickness) are easy - ask in the comments.

Tagi