1 / 2
K31 Putzböckli
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front and back supports to make a K31 Putzböckli (Swiss-german for "cleaning stand").
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Back and front support for a K31 cleaning stand, with an 8° tilt to the front.
The back support plugs into the magazin shaft. The front supports the barrel and is profiled to clear the locking rod and hand guard.
Both front and back supports have a 90x90mm footprint and 4 holes for M5 screws. There is also a hole that enables to clamp the supports if screwing is not desired.
No support needed (although there is a small overhang.
Best printed in PETG with a 20% gyroid infill.