Busto Jesus — Decorative Hollow Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AI / Tripo AI decorative bust. Digitally validated; not physically printed. STL + 3MF, approximately 98 mm tall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
Busto Jesus — Decorative Hollow Bust
Decorative sculpture by Santurtzi3D. Created with AI / Tripo AI, followed by digital mesh cleanup and slicing review. The main sculptural geometry has been preserved; disconnected residual geometry was removed from this preparation copy.
Digitally validated, not physically printed. Preview images are renders of the supplied mesh, not photographs of a print. Physical print success, surface finish and support removal have not been tested.
Prepared dimensions in the supplied orientation: 66.51 × 89.65 × 98.00 mm. STL and geometry-only 3MF are in millimetres. The original STL had no declared units; this is a chosen preparation size. The supplied orientation was adjusted by 7.86 degrees to improve geometric support without reshaping the sculpture.
Digital slicing reference: Bambu Lab A1, 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% gyroid infill, normal automatic supports, 30-degree threshold, 0.20 mm support Z gap and 6 mm outer brim. PLA reference only. Supports are needed under overhangs; remove carefully around fine details. Inspect the preview and adapt the material profile to your own filament and printer. No printer-ready G-code is included.
Estimated total printing time: 6 h 8 min 59 s. Estimated PLA use: 81.80 g including supports. These are slicer estimates, not measured usage.
Hecho con IA / Tripo AI. Validado digitalmente, no impreso físicamente.