1 / 3
Sunmeadow Garden Pair - Free Skep & Flower Trough + CAD — zdjęcie 1
1 / 3

Sunmeadow Garden Pair - Free Skep & Flower Trough + CAD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A free miniature garden pair: banded skep stand and ten-flower trough, with editable CAD.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A complete free garden scenery pair: a straw-style skep stand and a flower trough. Two original fixed STL models with matching editable CAD. No purchase or paid expansion required.

THE MODELS

Sunmeadow Garden Skep Stand: A solid miniature straw-style skep with raised spiral-like horizontal bands, shallow backed entrance, stone stand, approach step and clusters of broad-petal flowers. No real insect housing or hollow hive interior.

Sunmeadow Flower Trough: A fixed scored wooden trough with bands, corner posts, studs, backed soil and ten attached flower heads on broad stems. Decorative miniature scenery, not a functional planter.

DIMENSIONS

Sunmeadow Garden Skep Stand: 76.2 x 63.5 x 36mm including base and projections.

Sunmeadow Flower Trough: 88.9 x 50.8 x 24.42mm including base and projections.

FILES

2STLs,2matching OpenSCAD sources, actual mesh preview images, dimension and check reports, instructions and license notice. No figures, branded compatibility, fitted connectors, playable rules, physical goods or customer G-code.

BEFORE YOU PRINT

All delivered meshes passed watertightness, consistent winding, positive volume,

single connected body, base-at-Z0 and nonempty horizontal sections every0.2mm.

Exact delivered CAD sources compiled in the OpenSCAD2026.10.25 development

snapshot with Manifold and matched their STL solids within0.02mm bounds,

0.5% relative volume and1% symmetric-difference volume tolerances.

Exact STL hashes independently sliced in OrcaSlicer2.4.2 with one Creality K1SE

0.4mm nozzle / Generic PLA /0.16mm layers /3walls /15% infill / normal automatic

supports profile, base down at100%. Settings, input hashes, nonempty named

layers and extrusion XYZ bounds were checked. This is a digital smoke check.

Physical printing, support removal, fine-feature survival, figure fit, strength,

other printer/material workflows and actual machine behavior remain untested.

Inspect every layer and supports in your own slicer and make a trial print.

No printer G-code, printer profiles or pre-supports are supplied to customers.

All models are fixed decorative miniature scenery. No moving mechanisms,

opening doors, removable roofs, usable vessels, real insect housing or figures.

Previews show the delivered meshes; they are not photographs of prints.

LICENSE

SUNMEADOW GARDEN PAIR / COPYRIGHT2026 CARTER GRACE STUDIO

Creative Commons Attribution-NonCommercial-ShareAlike4.0 International

https://creativecommons.org/licenses/by-nc-sa/4.0/

Legal code: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.en

This license applies to the Sunmeadow Garden Skep Stand and Flower Trough,

their matching CAD, original preview images and documentation in this package.

It does not license the paid Sunmeadow Apiary models or any other studio pack.

You may share and adapt for noncommercial purposes with appropriate credit,

a license link and notice of changes. Distributed adaptations must use this

license or an officially compatible license. No additional legal or technical

restrictions may be imposed. These freedoms cannot be revoked while the

license terms are followed. The linked legal code controls.

Attribution: Sunmeadow Garden Pair by Carter Grace Studio, CC BY-NC-SA4.0.

Original creator: https://www.printables.com/@CarterGrace_5588941

Provided as-is, without warranties. Physical printing and fit remain untested.

Tagi