Lickitung Pokemon Motor Visualizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wild Lickitung has appeared on your motor! Watch the tongue!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 664
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey, someone's got to eat all that spaghetti… why not a Lickitung? This Pokemon's tongue goes wild! Gotta catch 'em all?
No supports needed. I recommend printing at .15mm (the one pictured is at .1mm) or better to preserve the details. Use some adhesive for a small magnet to be attached to the peg on the tongue (you may want to do this with it in the mouth depending on your magnet size. Adhesive is also used to mount the body to the surface of the motor.
If you want to use multiple colors, I have 3 different layer heights built in to the little guy. One for the outlines (lowest at .5mm height), the claws and stripes (middle at .75mm height), and the skin is the highest at 1mm. You may wish to scale the model vertically if you're going to attempt this, depending on how well you know your printer. Admittedly I have no experience in color swapping.
