Toiletry Organizer with Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toiletry organizer with a handle (attached by M5 screws), 12 divisions.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can attach the handle using M5x20 screws (or any M5 that is at least 20mm long).
I've included 3 sizes of handles. My advise is to use the compact handle as I feel it fits the size of the organizer the best.
I increased the size and number of compartments and made the walls thinner.
No special print settings are needed. Just make sure your printer is set up for optimal bed adhesion (using brims, the correct bed and chamber temperatures, etc.). One corner of the body lifted off the bed about halfway through my print. I printed mine in PETG with 15% infill.
Printed on Snapmaker U1 on a 270x270x270 bed. Dimensions of the organizer are 114X230X96.
Big thanks to Hisoka for the original design!