Ducati Monster M900 (1994) – Lithium Battery Box Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A battery-box adapter for a 1994 Ducati Monster M900 that fits the stock battery box and uses the original mounting box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this adapter to fit a smaller Shorai lithium battery into the stock battery box on my 1994 Ducati Monster M900, rather than use the foam pads that come with the battery. This gives it a much cleaner look.
The adapter sits inside the original battery box and uses the stock bolt locations. The battery is a snug friction fit inside the adapter. Openings in the sides and ends reduce material and provide access to the mounting points. I also removed the original rubber hold down straps and bumpers, and since I didn't need them anymore, trimmed off the hold-down strap hooks.
Fitment
Fit-tested on my 1994 Ducati Monster M900.
Designed around a Shorai lithium battery (model LFX18L1-BS12). Check your battery’s dimensions against the adapter before printing; not all lithium batteries use the same case size.
Compatibility with other Monster years and models has not been verified.
Installation
Place the adapter in the original battery box and secure it using the stock mounting locations. I added some washers and bolts that were about 5mm longer than stock. Insert the battery and check that it sits fully in the adapter without excessive force.
Use a suitable nonconductive hold-down to retain the battery. Check that the battery, terminals, cables, and hold-down have adequate clearance and that the positive terminal is protected against contact with metal.
Testing and materials
The adapter has been printed and fit-tested in the stock battery box. Long-term road durability has not yet been verified.
Files
STL model for slicing with your preferred software.
Bambu Studio 3MF project with the print setup used to prepare this version.
Version
v1.1 — Fit-tested adapter for the stock battery box.
This is an independently designed part and is not affiliated with Ducati or Shorai.