Bowden Extruder Mount for Anet A8 Dovetail Accessory
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed somewhere to mount the extruder after a bowden conversion, but one corner has the spoolholder…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed somewhere to mount the extruder after a bowden conversion, but one corner has the spoolholder (https://www.thingiverse.com/thing:2141857), the other has some switches (https://www.thingiverse.com/thing:2843169), and most of the other possible locations supported by existing mounts seemed less than ideal. I then found this dovetail bracket and figured it could ultimately support multiple extruders and other add-ons.
I took one of the test objects and merged it with a stepper-motor spacer to create an extruder mount. Add an M3x10 screw and nut to use as a setscrew to lock it in place, then bolt on your extruder bits on one side and your stepper motor on the other.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
40%
Filament: MG Chemicals ABS silver
Notes:
Only a little bit of support (touching the bed) is needed, though I accidentally printed mine without and it's still functional.
Category: 3D Printer Parts