Gargoyle Door Knocker - Print In Place Halloween Door Decoration!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gregor the Gargoyle, now a spooky Halloween door knocker! Print In Place or separate parts.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
Knock, knock. Who’s there? Gregor!
Gregor the Gargoyle lost his head, but don’t worry, it’s going to good use! This is a scaled-up door knocker remix of the Gregor the Gargoyle statue from our “Fabled Creatures” collection. What better way to get in the Halloween spirit than a spooky gargoyle head on your front door? Very inviting.
Three Versions
Print In Place: One piece, no assembly required!
Separate Parts: Fits a wider range of printer beds, knocker swings smoother, and arguably looks better. (Requires M3 screws to attach the handle to the shaft that runs through the mouth.)
XL Version!: Scaled up to fit the Prusa XL build volume (or similar sizes). No Print-In-Place version of this one. (M5 screws required to assemble the knocker.)
Fair warning: neither version is a very loud knocker. This one is more about looks than function.
Files included
Print In Place Gargoyle Door Knocker STL
Print In Place Gargoyle Door Knocker REDUCED STL
Separate Gargoyle Door Knocker Head STL
Separate Gargoyle Door Knocker Head REDUCED STL
Handle for Separate Version STL
Handle for Separate Version REDUCED STL
Shaft for Separate Version STL
BIG Version of the Knocker (requires a Prusa XL sized build volume or bigger)
REDUCED files are smaller file sizes that are easier for less powerful computers to handle, but they give up some finer detail.
Recommended print settings
0.2mm max layer height (lower or variable preferred)
3 perimeters
10% Infill (Adaptive or Support Cubic recommended)
Supports REQUIRED under the horns, ears, and knocker handle (see photos)
Tree / Organic supports highly recommended
ASA filament recommended for long term outdoor use.
This remix is FREE for you folks! Check out the rest of my premium spooky designs in my shop.
Want to support what I do? Check out my socials: http://www.MandicReally.com/links
Designs are covered by a “Standard Digital File License.” This license is for personal use only, and no derivatives are allowed. Commercial resale is never authorized without written permission. Want to become an Authorized Reseller? Join my Patreon on the “Merchant” tier to start selling today: https://www.Patreon.com/MandicReally