Bicycle Flashlight Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I don't ride my bike enough at night to justify buying a headlight for it, but I have a nighttime ride coming up and…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 660
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I don't ride my bike enough at night to justify buying a headlight for it, but I have a nighttime ride coming up and already had a nice bright light I run with.
As set up, this'll mount on a 7/8" handlebar and will hold a Lux-Pro LP600C tactical flashlight (https://luxproflashlights.com/lp600c-extreme-tac-600-black.html). Modify the source as needed to work with your bike and your light. It's designed to be held to the bike with zipties; depending on whether you want a temporary or permanent installation, your light can be attached with more zipties or a Velcro strap.
(The diffuser is from https://www.thingiverse.com/thing:37728; scale it up 109% on X and Y to fit.)
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
30%
Filament: Shaxon ABS natural
Notes:
Tip the mount on its back for printing. Support is only needed for the handlebar end; use support blockers to keep supports out of the strap slot.
Category: Sport & Outdoors