1 / 4
Friction Latch (PETG) — zdjęcie 1
1 / 4

Friction Latch (PETG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a firction latch designed for PETG. STEP, STL and FreeCAD files are provided.

Ocena
5 / 5
Polubienia
3
Pobrania
7
Wydruki
1
Wyświetlenia
27
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

i spent some time designing, printing and re-designing until i ended up with something that can be closed/opened with the right amount of force.

it is slightly bigger than needed for some applications like smaller drawer and cabinets.

Print Notes ( important )

you should print "part 1" (the female part) on its side like this:

and make sure the amount of walls used makes it so there is no infill on the "C" part, there should only be walls ,like this:

the printing orientation of the other part doesnt matter that much, but i higly recommend %100 infill,

it wont be that much plastic ( only 11,81g of PETG )

Tagi