Fortune Telling Skull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's like a magic 8 ball but skull shaped! It also features two dice instead, which makes it infinitely more interesting
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Remixed from this model.
Additional Materials:
Glue (I used hot glue)
Plastic for the eyes
55m Inner Diameter, 3.5mm wide O-ring
silicone grease (vaseline will melt O-rings)
Water & food coloring
Print Settings:
Material: PLA
No supports should be needed for the skull
Nozzles: 0.4mm nozzle for the skull and skull cap. 0.2mm nozzle for the dice.
Layer Heights: I used 0.2mm for the skull, skull cap, and eye cutout. 0.12mm for the dice.
Skull Cap Supports: Tree Supports, 20mm Trunk Diameter, 0.4mm minimum Z seam distance.
Die Supports: Tree supports
Walls: At least 4 walls for the skull so it's water tight
Use the Eye Cutout Guide to draw 2 circles onto some plastic and cut them out. Once they've been cut out, you can glue them into the sockets.
Put the left die in the left side of the skull and the right die in the right side of the skull.
