Candy Corn Storage Box with Lift-Off Lid | Halloween
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Candy Corn Storage Box with Lift-Off Lid | Halloween. Complete default-size STL + STEP files.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A rounded candy-corn-shaped storage box with a sculpted lid and three internal compartments for wrapped sweets or small accessories.
Dimensions and storage layout can also be adjusted on the model page:
https://boxesmodel.com/models/halloween-candy-corn-case
Width, depth, height, compartments, divider junction position, divider height, wall/base thickness and lid clearance are adjustable.
The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page.
DEFAULT SIZE AND ASSEMBLY
154 x 180 x 58.30 mm overall. Divider height: 33.8 mm; base: 3.4 mm; nominal lid clearance: 0.30 mm per side. The pointed end reduces usable space.
Print one body and one lid. Clean the locating rim and seat the cover vertically. No purchased hardware is needed. Review the curved lid and underside rim for orientation and supports; it is not sealed.
Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print.
PRINT STATUS AND COLORS
Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied.
The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats.
CREDITS AND LICENSE
Created for boxesmodel with AI-assisted parametric CAD development.
© 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/
Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.