1 / 23
Caffeine Molecule for Your Desk — READY TO PRINT G-code, No Slicing Needed (CAS 58-08-2) — zdjęcie 1
1 / 23

Caffeine Molecule for Your Desk — READY TO PRINT G-code, No Slicing Needed (CAS 58-08-2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ready-to-print G-code with supports for Prusa MK4, MINI and Ender-3 S1. Engraved atom letters. Pictures are renders.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
1
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NEW: READY TO PRINT MULTICOLOR — 6 colours in one run (Bambu Lab H2C)

The same caffeine molecule and pencil pillars, now prepared for single-run 6-colour printing on a Bambu Lab H2C: CPK atoms with element letters (C black, H white, N blue, O red), white bonds with red C=O and blue C=N double bonds, red pencils with gold sharpened wood, and a white base with the blue MolGod.org logo, the raised formula C8H10N4O2 and a raised CAFFEINE / CAS 58-08-2 label.

Which multicolour file?

  • …Bambu-H2C-6-colour_3MF-project.3mf — Bambu Studio project: open it, check the layer preview, print.

  • …Bambu-H2C-nozzle-0.4-layer-0.16_SLICED.gcode.3mf — the same project already sliced for the H2C (G-code inside).

  • …print-specification.pdf — printer, filaments, settings, time and material on one page.

Print settings (Bambu Studio 02.08.02.61): Bambu Lab H2C, nozzle 0.4 mm on every nozzle, layer 0.16 mm, Bambu PLA Basic in 6 colours (Jade White 10100, Black 10101, Blue 10601, Red 10200, Light Gray 10104, Gold), tree supports in the colour of the active nozzle — all supports stand on the base, none on the build plate. Slicer estimate: 16 h 10 min, 162 g, 989 tool changes.

Scissor cups: the small cones under the atoms let you cut the molecule off the pencils with flush cutters at the end of each graphite tip — the cut face is in the colour of the atom.

Honest status: digital geometry validated and checked in the slicer; about 10 tiny overhang spots remain on undersides; a physical multicolour test print has not been made yet. Pictures of the multicolour version are renders.

More, the STL file for every colour and the full package: molgod.org/molecule/58-08-2 (tab READY TO PRINT MULTICOLOR).


At a glance

  • READY TO PRINT: G-code with supports for Prusa MK4, Prusa MINI and Creality Ender-3 S1 — no slicing and no settings to prepare: load the file made for your printer (PLA 1.75 mm, 0.4 mm nozzle) and print. Each G-code works only on the printer it names; the MK4 file is for the MK4 — on an MK4S or other model the printer warns, so use the 3MF. Any other FDM printer: open the 3MF project in PrusaSlicer and slice.

  • Size: 100 × 100 × 84 mm · one piece, no glue · needs a build plate of at least 125 × 125 mm and 90 mm height

  • Print time (slicer estimate): 8 h 19 min (Prusa MK4) · 10 h 06 min (Prusa MINI) · 11 h 51 min (Ender-3 S1) · 85–87 g PLA · 0.4 mm nozzle

  • Difficulty: medium — after printing, cut the thin tree supports away around the small atoms with flush cutters (orange in the pictures); the pencil pillars stay (yellow in the pictures). The print itself comes out in one colour.

  • What makes it special: an element letter engraved on every atom, the name and CAS number on the base, a QR code under the base that links to the molecule page at molgod.org (scanning from a print not yet verified).

  • Pictures: all pictures are renders in our preview colours — we have no photo of a real print of this version yet.

Put caffeine on your desk.

Not as a formula in a textbook — as a molecule you can hold. An element letter engraved on every atom, visible double bonds, tall pencil-shaped pillars and a labelled base turn caffeine into a display piece for your desk, lab or classroom.

Your printer could be the next one to bring it to life.

Open the 3MF, pick your printer and slice — our slicer settings are inside. Own a Prusa MK4, Prusa MINI or Creality Ender-3 S1? Ready G-code with supports is included (use each file only on the printer it names). After printing, cut the thin tree supports away with flush cutters and keep the pillars — the remove/keep picture shows which is which.

Bonus challenge: once the supports are off, snip each pencil pillar at its thin neck (about 2 mm) just under its sphere and sand the tiny cone — you get a free caffeine molecule to turn in your hand. Not yet confirmed by our own print, so tell us how it went.

Which file?

  • G-code WITH SUPPORTS (Prusa MK4 / Prusa MINI / Creality Ender-3 S1) — ready for 3D printing: load it on the printer named in the file and print. The supports are inside the file.

  • 3MF project — any FDM printer: open it in PrusaSlicer, choose your printer and slice. The supports are generated automatically when you slice, from the project settings (a plain 3D viewer shows the model without supports — that is expected).

  • STL NO SUPPORTS — for advanced users: add tree supports in your own slicer (settings in the PDF data sheet).

  • PDF data sheet — print settings, support removal and the licence, on 4 pages.

Keep the pencil pillars (yellow in the pictures, part of the model); remove only the tree supports (orange in the pictures) — cut them with flush cutters, do not pull.

Print settings

  • PLA 1.75 mm (dry) · nozzle 0.4 mm · layer 0.2 mm

  • Ready G-code: nozzle 210 °C first layer, 205 °C after · 3MF profile: 215 °C first layer, 210 °C after · bed 60 °C

  • 5 mm brim, no raft · organic tree supports — keep the 3MF support settings (every tree starts on the base)

  • Print at 100 %, no scaling or rotation · one piece, no glue

  • Build plate ≥ 125 × 125 mm (base + brim + skirt), height ≥ 90 mm · model 100 × 100 × 84 mm

  • Slicer times: Prusa MK4 8 h 19 min · Prusa MINI 10 h 06 min · Ender-3 S1 11 h 51 min · 3MF profile 9 h 52 min · 85–87 g PLA

Ordering a print from a print shop?

Send them one ZIP package (G-code with supports for three printers, the 3MF project, README "WHICH FILE TO USE" and instructions) together with the PDF data sheet: ZIP package · PDF data sheet.

A paid 3D printing service is commercial use and needs our commercial licence: [email protected]. A school makerspace, library or university that prints free of charge does not need it.

Community test

This release is open for community testing — we have not printed this exact version ourselves yet. If you print it, post a Make and tell us:

  • Are the atom letters readable?

  • Did the supports come off cleanly?

  • Did anything break or fail? A failed print tells us just as much.

With your permission, we will feature your print on the model page at molgod.org — and, if you wish, credit you by name in the acknowledgements of our planned scientific publication on printable molecular models.

Video is welcome, never required. We help with anything about this print until 26 November 2026: [email protected]

Download it. Print it. Show us what your printer can do.

We prepare ready-to-print 3D models on request — just ask us: [email protected]. Looking for another molecule? Send its name or CAS number — we can prepare a full print project within hours and confirm the time for your substance.

More about this model

Pictures are renders in our preview colours — the model prints in a single colour.

Licence: CC BY-NC-SA 4.0 (STL, 3MF and G-code) — free to print, share and adapt for non-commercial use (home, school, university, library, makerspace, museum). Selling the files or prints, and paid 3D printing services (also printing to order for a school), need our commercial licence: [email protected].

Attribution: Caffeine (CAS 58-08-2) 3D model, ready-to-print release 2026-10-28, package r19, by MolGod.org - https://molgod.org/molecule/58-08-2/ - CC BY-NC-SA 4.0. Renders: CC BY-NC-SA 4.0, like the model. Texts: all rights reserved. The MolGod.org name and logo are not licensed.

Tagi