Ender 3 Y-Axis Motor Relocation – Reinforced Idler Mount (16T/20T) [back]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced modification of the original Ender 3 Y-Axis Idler Assembly for Motor Relocation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reinforced modification of the original Ender 3 Y-Axis Idler Assembly for Motor Relocation.
Both sides of the mount are merged into a single structure for improved rigidity and overall stability.
Two versions available:
back_side_2_pulley_16T.stl – for a smooth 16T idler pulley (3 mm bore).
back_side_2_pulley_20T.stl – for a 20T idler pulley (3 mm bore).
Important: A new, longer GT2 Y-axis belt is required.
The model is designed to print without supports (zero waste). However, you can add supports if preferred.
Recommended print orientation is shown in the attached images.
X-axis left-side mod:
Original: https://www.thingiverse.com/thing:3668847
My modification: https://www.thingiverse.com/thing:7416986
X-axis right-side mod:
Original: https://www.printables.com/model/548048-minimalist-ender-3-x-axis-tensioner-belt-alignment
My modification: https://www.printables.com/model/1862050-minimalist-ender-3-x-axis-tensioner-belt-alignment
Y-Axis front-side mod:
https://www.printables.com/model/1862123-minimalist-ender-3-y-axis-belt-tensioner-front