CV Joint Demonstrative Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small-scale Constant Velocity Joint.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
This project is a Constant Velocity Joint that can be used to showcase how the technology works.
Besides the 3D printed components, it uses the following store-bought parts:
4* M3 heat-set inserts
4* 9 mm long M3 Fasteners
The heat-set inserts I used for reference can be bought from the BambuLab website.
The project requires assembly, so here is the guide:
Please refer to the CAD files for the names of the parts.
Push the heat-set inserts into the holes on the Enclosure 1 Lower and Upper parts.
Assemble the Joint Body.
Slide the Joint Body into the hole on the Enclosure 2 part and lock it with one of the Spinners.
Assemble the Enclosure.
Put the Enclosure 1 End Part in place and fasten it. Then put the remaining Spinner onto the Joint Body.
Now, your CV Joint is complete.