Separator for BaGooN's Electrical Wire Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, screw-in center separator for BaGooN's original Electrical Wire Spool.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Compact Separator for Electrical Wire Spool
A compact male-female threaded separator for BaGooN's Electrical Wire Spool.
This remix adds a central divider to the original spool, allowing 2 different wire types or colors to be stored in separate compartments without requiring additional hardware.
Features
Adds only 5 mm to the assembled spool length
Preserves the original male and female threaded connections
70 mm outer diameter
Compatible with the original spool end pieces
No additional hardware required
Physically printed and fit-tested
PRINTING: Both PLA and PETG work fine. Use 0.30 mm Draft or finer layer heights. Orient the part with the female (F) side facing the build plate and enable Slim Tree supports, build-plate only, inside the female socket.