Beelzebub (Helluva Boss) #1 220x140 Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a picture for a luminous frame measuring 220x140 mm
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The painting “Beelzebub #1” for my Light frame for hueforge / lithophane arts
Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings.
Printing recommendations:
Layer Height: 0.08mm
To achieve the best effect, use a 100% fill
I recommend calibrating the flow to avoid minor defects (flow ratio = 1)
To achieve the best effect, do not change the height to change colors
Color Settings:
Start with Yellow
At layer #9 (0.80mm) swap to Orange
At layer #15 (1.28mm) swap to Grey
At layer #18 (1.52mm) swap to Black for the rest
Check out my page to find all the available paintings. Click here to see other models!
If you want to see more exclusive paintings — or even NSFW paintings or custom-made paintings — subscribe to my boosty and follow my work in this area.
If you are interested in selling this model and paintings, then visit my boosty and look for the level of commercial use.
✨ I hope this project will brighten up your evenings) ✨