BMG Extruder Mount for Anycubic i3 Mega
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a mount for the Bondtech BMG (and its clones) extruder for my Anycubic i3 Mega so it can work with the X axis…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Designed a mount for the Bondtech BMG (and its clones) extruder for my Anycubic i3 Mega so it can work with the X axis cable chains with adequate clearance.
For v1: Use pancake stepper motor to ensure clearance if you are using a rear mounted 5015 blower fan duct for parts cooling.
For v2: stock NEMA17 stepper motor can be used as I've adjusted the mount to be able to still fit a stock motor with space for heat sink without reducing the build volume.
The use of v2 would be recommended.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
75
Filament: eSUN ABS+ Black
Notes:
Put support blockers at the holes for NEMA 17 screws as it can be printed without supports over there.
Set wall thickness to be 1.6mm with wall line count to be 4 if you are using the 0.4mm nozzle for added strength.
Category: 3D Printer Parts