Infant Optics Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the Infant Optics 360 degree camera. Its ring on top measures 67.5mm so other cameras and…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a wall mount for the Infant Optics 360 degree camera. Its ring on top measures 67.5mm so other cameras and things could be placed on top of it. The power cable is a tight fit, but it does fit provided you angle it properly when pushing it through. The cutout on the ring is for the cable pass through, mic, and antenna.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.12mm
Infill:
50%
Filament: Amolen Pla Glow-in-dark
Notes:
Print with the ring as the base for best results and fastest printing. On a .4 nozzle it took roughly 17hours to print. However my printer and slicer settings are for quality over speed.
Category: Camera