Topre Switch Plate Support Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple legs to support a Topre switch plate for lubing and assembly work. Works for PCBs too.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 706
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
29 Oct 2022 Update: I made an improved version of these you might want to try instead.
These are some simple legs to help support your Topre switch plate. They're a little more reliable than propping up the plate on whatever you can find around the house.
In addition, this also works well for holding up a keyboard PCB to allow you to insert through-hole components.
They're designed to be able to hold the bent metal edge present on some plates in a handy groove, but otherwise they don't physically attach other than by gravity. The arches were only there to cut down on the amount of material needed to print, but I have found them useful as finger holds as well.
I recommend using these on a silicon work mat or apply some sort of non-skid feet to the bottom, but you do you.
Printing Tips
- Sliced file for example only and intended to populate the estimated print time data. If you use it, it's sliced for PETG and a .4mm nozzle.
- No supports required.