1 / 2
Izuku Midoriya (Deku) - My Hero Academia Chibi Figure — zdjęcie 1
1 / 2

Izuku Midoriya (Deku) - My Hero Academia Chibi Figure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A highly detailed, 3D printable chibi figure of Izuku Midoriya (Deku) from My Hero Academia on a custom base.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Izuku Midoriya (Deku) - Chibi Figure

Bring the future Number One Hero to life on your 3D printer! This model features Izuku Midoriya (Deku) from My Hero Academia in a dynamic chibi style, complete with his iconic hero costume, scarf, and a custom decorative base.

Designed for easy slicing and high-quality results on both FDM and resin 3D printers.

---

Print Recommendations

* Printer Type: FDM or Resin (SLA/DLP)

* Layer Height: 0.12 mm – 0.16 mm (FDM) | 0.05 mm (Resin)

* Infill: 15% – 20% (Gyroid or Grid recommended)

* Supports: Tree/Organic supports are recommended for best surface finish under the scarf, hands, and chin.

* Perimeters/Walls: 2–3 walls for sufficient strength.

---

Tips for Best Results

1. Brim: Adding an outer brim helps stabilize smaller contact areas on the build plate.

2. Post-Processing: Carefully remove supports around fine details like the scarf ends before curing (for resin) or painting.

3. Painting: Prime with a light grey or white primer to make the green and yellow tones pop.

If you enjoy this model, please leave a like, share your makes, and post your painted versions!

Tagi