CNC 3018 Pro Upgrades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a bunch of parts I made for my 3018 Pro hobby CNC machine. I used Saur0n's cable chain as a starter, and…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 2279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Here's a bunch of parts I made for my 3018 Pro hobby CNC machine. I used Saur0n's cable chain as a starter, and modified the chain anchor to work for "pro" routers where a vertical plate is used instead of an extrusion to hold the gantry. I also modified the stepper end of the chain to hold a raspberry pi camera above the work piece.
In the past I had used fastkite's X limit switches but I had to design something new so that they would work without fouling the chain. While I was at it I also threw together a holder for my z-limit switches (tiny 12.8mm microswitches) which I just hot glued to the side of the z-axis.
Lastly I designed a mount for a raspberry pi on which I run CNC.js to control the router.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Kiwi3D PLA White
Category: DIY