1 / 4
Nexus Miner 40mm Fan Mount HIGH CFM Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm fan mount designed for the Sanyo Denki 40mm server fan (San Ace, Maglev etc)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Nexus Miner 40mm fan mount, with a duct to force air onto the VREG heatsink.
Originally didn't have fins diverting air but that had a dead zone for air output, although there are 2 low flow areas and it may seem counterintuitive this version dropped the temp by 3c, 6c in total compared to my open air mount.
RECOMMENDED HARDWARE
High CFM 40mm Fan, this wont work well with low CFM / Low static pressure fans (San Ace 40 is what i tested with)
Printed in PLA
Walls 5
Gyroid infill 25%
Supports - critical only
