CodeX Vault - Parametric Card Organizer for TCGs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric organizer insert with dividers for organizing tcg cards and other collectibles.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This was designed with the BCW shoe-box in mind, which may or may not be the same size as you need. My recommendation would be to check the width and length of your particular box and make adjustments in the card organizer file.
The provided models are 78 mm x 176 mm x 50 mm. 2 fit perfect as inserts, in the box, though I will consider adding additional common sizes if requested.
Dividers
There are 2 provided dividers, if you make any adjustments, then make sure to export them as well to match the adjusted box. The short divider seems to be the better of the 2, allowing for fingers to reach the cards more easily.
Print Settings
I found that reducing line count to 2 significantly reduced time to print, and helped reduce material weight. Additionally consider decreasing Minimum sparse infill threshold 10 mm^2 to reduce solid infill in the upper layers.
Planned Updates
Card dividers for sub organization (not to be slotted in, but only separate cards)
Model with lid for portability
Let me know if there is a feature that you would like to see or adjustments that can help improve the model.