(65mm / 50mm) Artillery Sidewinder X1 bed cable strain relief / guide!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really liked the design, but did not fit my 2 sidewinder's. I did not think there was a nicely build version for those…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 4
- Wyświetlenia
- 481
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Really liked the design, but did not fit my 2 sidewinder's. I did not think there was a nicely build version for those versions (V4's, one is 65mm from corner, and the other one is 50mm from corner). So i built them myself.
V1; Made to completely slide over the carriage, but will require the bed to be removed.
V2; Slide on version, just remove the back-right leveling wheel and slide the cover on. Secure it with the leveling wheel.
Print Settings
Printer:
Artillery Sidewinder
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
I strongly suggest to print in PETG for more temperature resistance
Category: 3D Printer Accessories